Whiteline Product for Proton IMPIAN 1.6

[Sogo]

Greetings to all!
Introduce my self as Sogo, a newbie posting from Kuala Lumpur, Malaysia. I am a club member of Waja Performance Club. Visit www.wpc.com.my

Currently im drving a sedan Proton Waja(IMPIAN) 1.6 manual model 2002 with mileage now clock at 83,600 kilometres
I did some upgrade to my car focusing on handling, stability ridgidity. Engine remain stock.

My car Setup
1. PU steering rack bush
2. PU Rear Short Lower Arm bush
3. 7 point grounding cable upgrade
4. Short Stroke TUFF Suspension (TAIWAN KYB)
5. EIBACH Prokit Springs, 5kg/mm front and 3kg/mm rear
6. 2 Point Tower Struts Braces
7. Bosch Heavy Duty High Performance Brake Pad Front/Rear

Future Setup
1. PU for all suspension joint and steering rack
2. 3 point Front(engine) and Rear(Luggage Compartment)
Strut Braces
3. HWL MT1 Twintube Hi Lo Adjustable Coilovers with Spring rate
at 5kg/mm front and 4kg/mm rear
4. Steel Braided Hose(Good Ridge/Pro-RS)


This car was originally manufactured with Anti Roll Bar(ARB or Sway)
My question
1. Is there any ARB (FR and RR) from WHiteline for my car?
2. Does the ARB included with PU Bushes and direct bolt-on?
3. Is there any PU for IMPIAN? I want to change all my suspension bushes, ARB and steering rack to Whiteline PU, whole set.
:confused: :confused: :confused: :confused: :confused:

Really need help from the experts. I am really thankful if you guys could share with me.

http://www.wpc.com.my
http://www.autoworld.com.my/forum/summary.asp?summary=1&forum=ap190914736&page=1

[Sogo]

Oops, just to add some info on Proton Waja(called IMPIAN in UK, Australia)

Proton Waja basic spec as follows

1600cc 4G18
16 Valve EFI
Macpherson Struts

Proton Waja Chassis actually the chassis as Mitsubishi Lancer 1.5 1996-1999(Same goes with Evo4-5)

Proton were a re-badge brand of Mitsubishi Japan.
Please visit http://www.proton.com.my

Most of the suspension parts are the same.

Thanks