SwayBar bush for Nissan Exa 1989

[TurboExa]

Need to know and get the d bush that connects the swaybar to the chassie for the front.

i measured the swaybar and i'm sure it says 29mm. the user manual says 28.6mm. but i can't seam to find anyone who makes this bush at this thickness.

What is the right thickness bush i need and where can i get it.

Need to Know ASAP and have money waiting.

been told it could be 22,24 or 27mm. what is it?

[Peter]

G'day,

We list Part # SPF616-xxK as the correct swaybar to chassis bush for your car, where "xx" is the diameter of the bar. This bush is available in 22, 24 and 27mm diameter.

Could I suggest that you accurately measure the diameter of your swaybar please using a vernier caliper. For your information, our replacement heavy duty front bar BNF10 is (a solid) 24mm dia. I suggest your bar might be a hollow section of either 22 or 24mm diameter.

We do not discuss pricing on the forum and if I can be of further assistance in that regard please contact me off list using the link below:

Regards
Peter
peter@whiteline.com.au

[Lonx]

I measured mine today very roughly with a ruler & line of sight only. Seemed a little under 30mm... but I have replaced them with Superpro bushes I sourced through whiteline in the past, and would imagine they are 27mm if that is the largest available.