PDA

View Full Version : S13 whiteline control springs 90044

jbonevia
17-01-2005, 08:49 PM
Hi,

I want to purchase a set of springs to suit my shocks. I have been looking at the whiteline control springs - part number 90044 in the catalogue.

I have a complete set of near new KYB AGX shocks to go with the springs.

The car will be track raced but also driven on the street. probably an 80/20 ratio of street/track.

I would like to know the ride height of the vehicle when fitted with the whiteline control springs.

I want to keep the ride height above 100mm (preferable around 115-120mm) for legality/roadworthy reasons.

I have a set of low king springs as well, however these are a little low for my liking.

Has anyone got any information on the ride height of these springs as i dont want to spend $300+ on the springs to find out that they are not suitable.
Wayne
18-01-2005, 10:42 AM
Hello,

The springs that you are enquiring about # 90028, will approximately provide the following ride heights:
Front - 365 > 370mm
Rear - 350 > 355mm (measured from the centre of the wheel to guard).
These springs will keep you well within the legal requirements.

I hope this helps you.

Regards
Wayne
wayne@whiteline.com.au
jbonevia
18-01-2005, 07:10 PM
Cool - thanks for your help.
jbonevia
24-01-2005, 11:38 AM
Actually can you please confirm this part number?

According to your website and online catalogue, part number 90028 belongs to a VR-VS commodore:

H/duty coil springs-vehicle set
Flatout / VR-VS V6 sedan / Complete vehicle set in Control or Flatout
Code: #90028
Price: AU$295.45


Part number 90044 shows as:
Control / Nissan S13/Silvia / Complete vehicle set in Control or Flatout
Code: #90044
Price: AU$295.45
Wayne
24-01-2005, 01:15 PM
Hello,

I am terribly sorry, I do not know what I was thinking when I was putting in the part numbers that you require as I have put in the incorrect part number.
As you have pointed out, the part number that you need is #90044.
All the information that I have given you relates to the # 90044 spring kit that suits the Nissan S13.

Cheers
Wayne
wayne@whiteline.com.au
jbonevia
24-01-2005, 03:59 PM
Thats OK - i just wanted to be sure of the part number as i will be ordering these springs through a local supplier this week.

Cheers...