ZZE122 Corolla

[et8oi89]

Hi, I've got an 05 model corolla. I have plans to slowly turn it into a track car. I've looked but I can't find anything that will adjust for more positive caster. Ordering the 24mm sway bar and strut braces when my pay check comes in...

Is this car just not worth doing R&D on?

[Whiteline]

Hi,

Have you tried camber bolts and often you can use then in both top and bottom hole of the strut leg and get massive camber adjustment.

We sell them as a universal type all you need is the hole size and it will be KCA412 for 12mm or KCA414 for 14mm it is the last two numbers for the size of bolt hole.

This will work on the front but the rear is a meam type axle and Camber does not change with the hieght anyway.

Positive camber is not usually want is used on track cars most have negative camber and allot of it but either way with these bolts you can have allot of adjustment.

We have done R+D on this car a few years back but now as they are getting older and most people that track cars or modify go for performance based cars there would not warrant enough sales to buold more tooling or make much more for this car.
You would be the only one in about a year that has asked for any parts for the ZZE122 more than we allready do.