LJ Torana Sway Bar Fittment

[73LJWhiteSL]

gday,

could someone please explain (preferabley with pictures) how i fit my sway bar to my LJ Torana. Sway bar is BHF36.

Thanks

[Wojtek]

Hi Steve,

BHF36 - Holden Torana LJ with extractors - is a "clamp-on" type sway bar.

Sway bar fitting instruction are included with the sway bar. Main fitting procedure is;
1) Using 2 U-bolts, 2 flat plates, 2 saddles, 2 22mm D-bushes and 2 nuts, mount the back of the sway bar to the rear of the cross member.
2) Using 2 x 18mm D-bushes (radius rod) and 2 x 22mm D-bushes (sway bar), 4 curved brackets and nuts and bolts supplied, attach the front of the sway bar to the front of the raduis rod.

Make sure to grease all bushes, and as always sway bars must be fitted with the car at normal ride height.

Hope this helps.
Wojtek.

[73LJWhiteSL]

I understand 2) but i don't quite understand where on the crossmember i attache the u bolt assembly or the way in which it assembles.

I assume it works with nuts, Saddle, D bush, crossmember, plate, ubolt?

you don't have any images of the sway bar fitted that you can email me do you?

thanks

[Wojtek]

Hi Steve,

I have faxed you the fitting instructions.
Trust that this helps.

Wojtek.