1990 mazda gtx rear swaybar problems

[chrisgtx]

i have just fitted one and it doesn't fit well.
i'm unable to line it up equally with the diff and bolt the hangers on an equal side.(outside or inside).
instead i have had to bolt the hangers onto the right side of the bar ends,of the end adjustment hole.i dont think you could even use the inner hole as that looks too much of a steep angle for the bars to go through the wishbones.
anyway,the bars going through the wishbones dont look right and are on a bit of an angle.
basically ,it doesnt look right.
i wonder if the non adjustable bar fits better??
anyone have any ideas?
thanks

[Wojtek]

Hi,
What is the sway bar part number?
In the mean time, I will see what I can find.

Wojtek.

[chrisgtx]

it is:
WHIBFR43Z

[Wojtek]

We list a BMR43Z for Mazda 323 GTX BG 91-94. The end links on this sway bar are located on the outside of the sway bar on both sides. Are you fitting your sway bar with the car at normal ride height? If you are fitting it with the wheels at full droop, then the control arms and end links will be at incorrect angles, causing misalignment.
If you have any pictures, please email them to me at wojtek@whiteline.com.au

Wojtek.