bennjamin
04-07-2004, 05:45 PM
Hi guys....
For those who know the front suspension setup[ of a Honda civic ( 92-95 EG hatch) - I have purchased a front castor kit for it :)
Basically , I intended to install this afternoon funnily enough , but was struck with a problem - There are two main bolts to remove , one with a nut and the othewr which nestles into the rear part of the lower control arm....the shims go inbetween the fronn and rear segments of the front LCA's.
MY problem is , what is the best procedure of installing , AND how can i take out the main bolt ( bolt B , which is to be replaced by a whiteline elongated bolt) - on the basic instructions , it says to " unbolt bolt , pressout bolt B "......Does this mean i have to machine press out , or can be achieved with normal tools ?
Any guidence appreciated....cheers !
For those who know the front suspension setup[ of a Honda civic ( 92-95 EG hatch) - I have purchased a front castor kit for it :)
Basically , I intended to install this afternoon funnily enough , but was struck with a problem - There are two main bolts to remove , one with a nut and the othewr which nestles into the rear part of the lower control arm....the shims go inbetween the fronn and rear segments of the front LCA's.
MY problem is , what is the best procedure of installing , AND how can i take out the main bolt ( bolt B , which is to be replaced by a whiteline elongated bolt) - on the basic instructions , it says to " unbolt bolt , pressout bolt B "......Does this mean i have to machine press out , or can be achieved with normal tools ?
Any guidence appreciated....cheers !