PDA

View Full Version : Whiteline bushes for glanza?


james
15-05-2007, 01:27 AM
Hi, is it possible to get these bushes (arrowed in blue below) for an EP91 Toyota starlet GT? pic not working, but please see link. I used img tags.

Picture is of front lower suspesnion arm (nearside)

Just tried to get some from toyota and they only sell the whole suspension arm at £130 each.

http://homepage.ntlworld.com/james.greenfield/Glanzabush.JPG

Whiteline
15-05-2007, 09:37 AM
Hi James,

Thanks for your interest in Whiteline products.

For your Starlet we offer an Anti-lift/Caster Kit that replaces the rear lower control arm mount with an offset polyurethane bush and bracket to give the vehicle the Anti-lift and increased Caster properties. Our instruction sheet with graphical representation of this can be found at http://www.whiteline.com.au/docs/instructs/245_KCA325.pdf

Unfortunately we don't have a bushing to replace the front of the lower control arm.

As you are in the UK it would be best to contact Whiteline Automotive UK for any pricing and purchasing information you require, they may also be able to steer you in the direction of where you can source quality replacement bushes for the front of the arm.

Whiteline Automotive UK
Merlin House
5 Cross Way
Hillend Industrial Park
Fife. Scotland KY11 9JE
Phone: 01383 820820
Fax: 01383 820 111
Email: sales@whitelineautomotive.co.uk
Website: www.whitelineautomotive.co.uk

They will be more than happy to assist with any enquiries you may have.

If you have any further questions please don't hesitate to contact myself or Whiteline Automotive UK.

Kind Regards,

Wayne
WayneV@whiteline.com.au

anonymous
19-06-2007, 09:59 PM
James,

re: lower control arm for starlet

For the bush on the left of the picture, you should be able to use a generic brand like superpro bushes. Over here they might cost around AU$22 for two. They will be stocked in two sizes (the diameter of the bush) for the starlet. The larger size is for the GT (ep82) and the smaller for the Glanza (ep91). These bushes take a bit of effort to remove:confused: , but worth the change.




http://www.superpro.eu.com/

Here are all the part numbers for superpro items to replace the bushes you circled. Remember there are two sizes for the GT/Glanza respectively.

(Bush circled on left)
SPF1905K
SPF1888K


(Bush circled on right)
SPF1906K
SPF2635K

For the bush on the right... Go the anti-lift/castor kit. It's well worth it.:cool: